ARB: Anti Roll Bar / Sway Bar / Stabiliser Bar

  1. Remove metal bracket of original rubber bushing.
  2. Remove old rubber bushing and clean bar.
  3. Find slit on new poly bushing and slide over the bar.
  4. Refit metal bracket.
  5. The installation is complete.

ME: Metelastic Bushing

  1. Remove worn OE bushing by pressing out or using a blow torch.
  2. Ensure outer metal casing of original rubber bushing is removed, which can be done by cutting with a hacksaw and knocking it out with a chisel.
  3. Clean housing with sandpaper to remove sharp edges.
  4. Use mechanical press install new bushing, making sure that it is in the same position as the original bushing that has just been removed.
  5. The installation is complete.

ML-MS: Mechanical Lock (with Metal Sleeve)

  1. Remove worn OE bushing by pressing out or using blow torch.
  2. Ensure outer metal casing of original rubber bushing is removed, which can be done by cutting with a hacksaw and knocking it out with a chisel.
  3. Clean housing with sandpaper to remove sharp edges, so as to not damage new bushing.
  4. Remove metal sleeve from new poly bushing.
  5. Lubricate inside and outside of new poly bushing with multi-purpose grease.
  6. Press new bushing onto the arm, ensure the most tapered flange faces the arm when pressing in the new poly bushing.
  7. Bench vice or mechanical press can be used.
  8. Once the bushing is inserted, tap the metal sleeve into the bushing using a rubber mallet.
  9. The new bushing installation is now complete.

ML-PS: Mechanical Lock (with Poly Inner Bush)

  1. Remove worn OE bushing by pressing out or using a blow torch.
  2. Ensure outer metal casing of original rubber is removed, which can be done by cutting with a hacksaw and knocking out with a chisel.
  3. Clean housing with sandpaper to remove sharp edges, so as to not damage new bushing.
  4. Lubricate inside and outside of new poly bushing with multi-purpose grease.
  5. Press new bushing into the arm, ensure the most tapered flange faces the arm when pressing in the new poly bushing.
  6. Bench vice or mechanical press can be used.
  7. The new bushing installation is now complete. 

MT-H: Mousetrap – Horizontal

  1. Remove worn OE bushing by pressing out or using blow torch.
  2. Ensure outer metal casing of original rubber bushing is removed, which can be done by cutting with a hacksaw and knocking it out with a chisel.
  3. Clean housing with sandpaper to remove sharp edges, so as to not damage new bushing.
  4. Lubricate the inside of the outer bushing.
  5. Tap outer bushing into the housing.
  6. Tap inner bushing into the outer bushing.
  7. The installation is complete.

MT-V: Mousetrap – Vertical

  1. Remove worn OE bushing by pressing out or using blow torch.
  2. Ensure outer metal casing of original rubber is removed, which can be done by cutting with a hacksaw and knocking out with a chisel.
  3. Clean housing with sandpaper to remove sharp edges, so as to not damage new bushing.
  4. Lubricate the inside of the outer bushing.
  5. Tap outer bushing into the housing from the top of the arm with a rubber mallet.
  6. Tap inner bushing inside the outer bushing from the underside of the arm. (Do not attempt to remove the metal sleeve from the inner bushing.)
  7. The installation is complete.

PS: Power Steering Rack

  1. Match bushings in the new poly power steering kit to corresponding bushings on the power steering.
  2. Remove the corresponding original worn bushings off the power steering.
  3. Replace the worn bushings with the corresponding poly bushings.
  4. The installation is complete. 

R-MS: Rotational (Metal Sleeve)

  1. Remove original bushing by pressing out or using a blow torch.
  2. Ensure outer metal casing of original rubber is removed, which can be done by cutting with a hacksaw and knocking out with a chisel.
  3. Clean housing with sandpaper to remove sharp edges, so as to not damage new bushing.
  4. Remove metal sleeve from the new poly bushing.
  5. Lubricate inner part of the bushing with multi-purpose grease.
  6. Tap poly bushing into housing with a rubber mallet.
  7. Tap metal sleeve into poly bushing.
  8. Installation is complete.

R-PS: Rotational (Poly Sleeve)

  1. Remove original bush by knocking out with a rubber mallet.
  2. Clean housing with sandpaper to remove sharp edges, so as to not damage new bushing.
  3. Tap new bushing into housing with rubber mallet. (Do not attempt to remove the centre bushing as it rotates inside the outer bushing).
  4. The installation is complete.

SB: Spring Shackle Bush

  1. Take the weight of the vehicle off the leaf spring.
  2. Unbolt the shackle hangar.
  3. Remove the old bushing off the bolt.
  4. Replace with new poly bushings.
  5. Bolt up the spring shackle to the chassis.
  6. The installation is complete.

SBS: Spring Bush Style

  1. Remove original bushing by pressing out or using a blow torch.
  2. Ensure outer metal casing of original rubber is removed, which can be done by cutting with a hacksaw and knocking out with a chisel.
  3. Clean housing with sandpaper to remove sharp edges, so as to not damage new bushing.
  4. Remove metal sleeve from the new poly bushing.
  5. Lubricate inside and outside of poly bushing with multi-purpose grease.
  6. Press two bushing valves into housing. (Rubber hammer or by hand).
  7. Insert metal sleeves into bushings.
  8. The installation is complete.

Index – Numerical

PSB 001 – PSB 410

 

PART NUMBER CATEGORY            PART NUMBER CATEGORY PART NUMBER CATEGORY
PSB 001 SB PSB 057 ARB PSB 192 ARB
PSB 001-019 SB PSB 058 SB PSB 197 R-MS
PSB 002 SB PSB 060 SB PSB 198 PS
PSB 003 SB PSB 064 ARB PSB 199 ML-MS
PSB 004 SB PSB 077 SB PSB 206 SBS
PSB 005 SB PSB 078 SB PSB 206a SBS
PSB 006 SB PSB 081 ARB PSB 207 PS
PSB 007 SB PSB 082 SB PSB 213 ARB
PSB 008 SB PSB 112 SB PSB 216 ML-MS
PSB 009 SB PSB 121A SBS PSB 217 ML-MS
PSB 010 SB PSB 121B SBS PSB 221a ML-MS
PSB 011 SB PSB 135F SBS PSB 221b R-MS
PSB 012 SB PSB 135R SBS PSB 221c ML-MS
PSB 013 SB PSB 147P MT-V PSB 222 R-MS
PSB 014 SB PSB 148 SBS PSB 226 ML-MS
PSB 015 SB PSB 150 ML-MS PSB 227 R-MS
PSB 016 SB PSB 151 R-MS PSB 228 R-MS
PSB 017 SB PSB 153 ME PSB 230 PS
PSB 018 SB PSB 154 ARB PSB 249 ML-MS
PSB 020 SB PSB 155A ML-MS PSB 250 ML-MS
PSB 022 ML-MS PSB 155B ML-MS PSB 251 ML-MS
PSB 023 ML-MS PSB 156 ARB PSB 259 ML-MS
PSB 024 ML-MS PSB 157 ML-MS PSB 260 ML-MS
PSB 030 SB PSB 160 R-PS PSB 261 ML-MS
PSB 031 SB PSB 160f SBS PSB 401 PS
PSB 032 SB PSB 160XL R-PS PSB 402 PS
PSB 033 SB PSB 163A ML-MS PSB 403 ARB
PSB 036 SB PSB 163B SBS PSB 404 ARB
PSB 040 SB PSB 164 SB PSB 405 ARB
PSB 046 ME PSB 167 SB PSB 407 R-MS
PSB 047 SB PSB 169 ARB PSB 408 R-MS
PSB 052 SB PSB 181 SB PSB 409 R-MS
PSB 056 ARB PSB 190 ARB PSB 410 ARB

PSB 411 – PBS 598B

PART NUMBER PSB PART NUMBER CATEGORY PART NUMBER CATEGORY
PSB 411 ML-MS PSB 508 ARB PSB 556 SB
PSB 412 ML-MS PSB 509 ARB PSB 558 SBS
PSB 413 ARB PSB 510 ML-MS PSB 559 SBS
PSB 414 ARB PSB 510F SBS PSB 561 SBS
PSB 415 ARB PSB 511 ML-MS PSB 562 SBS
PSB 416 ARB PSB 516 SB PSB 563 SBS
PSB 417 ML-MS PSB 516-4 SB PSB 564 ML-PS
PSB 418 ARB PSB 519 SBS PSB 566 SBS
PSB 422 ML-MS PSB 523 SB PSB 567 SBS
PSB 431 ARB PSB 526 ML-MS PSB 568 SBS
PSB 435 (AD169) ARB PSB 527 ML-MS PSB 570 ARB
PSB 435 ARB PSB 528 ML-MS & R-PS PSB 573 ML-MS
PSB 439 PS PSB 528 ** ML-MS & R-PS PSB 577 ML-MS
PSB 450 ARB PSB 530 ML-MS PSB 578 ML-MS
PSB 451 ARB PSB 530 ** ML-MS PSB 580 ML-MS
PSB 452 ARB PSB 531 ML-MS PSB 580R ML-MS
PSB 453 ARB PSB 532 ML-MS PSB 581 ML-MS
PSB 460 MT-H PSB 533 ML-MS PSB 583 SBS
PSB 461 ML-MS PSB 534 ML-MS PSB 583 ML-MS & SBS
PSB 463 ML-MS PSB 535 ML-MS PSB 585 ML-MS
PSB 465 ML-MS PSB 536 ML-MS PSB 587 ML-MS
PSB 466 SBS PSB 537 ML-MS PSB 589 ML-MS
PSB 467 SBS PSB 538 ML-MS PSB 590 ML-MS
PSB 468 SBS PSB 540 ARB PSB 591 ML-MS
PSB 490 ARB PSB 541 ARB PSB 592 ML-MS
PSB 491 ARB PSB 542 ARB PSB 594 SBS
PSB 500 PS PSB 543 ARB PSB 595 ML-MS
PSB 501 SBS PSB 545 ARB PSB 596 ML-MS
PSB 502 ML-MS PSB 546 ARB PSB 597 ML-MS
PSB 504 SBS PSB 547 ML-MS PSB 597B ML-MS
PSB 505 SBS PSB 548 ML-MS PSB 597C ML-MS
PSB 5056* SBS PSB 549 ML-MS PSB 598 ML-MS
PSB 507 ML-MS PSB 555 SB PSB 598B ML-MS

PSB 598C – PSB 780

PART NUMBER CATEGORY PART NUMBER CATEGORY PART NUMBER CATEGORY
PSB 598C ML-MS PSB 621 ARB PSB 643 ARB
PSB 599 ML-MS PSB 622 ARB PSB 644 ARB
PSB 599B ML-MS PSB 623 ARB PSB 645 ARB
PSB 599C ML-MS PSB 624 ARB PSB 646 ARB
PSB 601 ML-MS PSB 625 ML-MS PSB 647 ML-MS
PSB 602 ML-PS PSB 626 PS PSB 649 ML-MS
PSB 603 ML-PS PSB 627 SBS PSB 649 ML-MS
PSB 604P ML-PS PSB 628 SBS PSB 653 ML-MS
PSB 605 ML-PS PSB 629 SBS PSB 654 SBS
PSB 606 ML-MS PSB 630 ML-MS PSB 673 ML-MS
PSB 607 ARB PSB 631 ARB PSB 673F SBS
PSB 610 ME PSB 632 ARB PSB 680 SBS
PSB 611 ARB PSB 633 ARB PSB 689 ML-MS
PSB 612 ARB PSB 634 ARB PSB 690 ML-MS
PSB 613 ARB PSB 635 ARB PSB 700-19/21/23 ARB
PSB 614 ARB PSB 636 ARB PSB 730 ML-MS
PSB 615 ARB PSB 637 ARB PSB 732 SBS
PSB 616 ARB PSB 638 ARB PSB 733 MT-V
PSB 617 ARB PSB 639 ARB PSB 734 MT-V
PSB 618 ARB PSB 640 AL-PS PSB 739 ML-MS
PSB 619 ARB PSB 641 ARB PSB 750 SBS
PSB 620 ARB PSB 642 ARB PSB 780 ARB